Digital mapping is used by such companies as the Thomas Guide,(which are used by many delivery and taxi companies to navigate and find their way around cities and towns) are loaded into the many electronic devices (such as mobile phones,tablets and GPS devices) that are being used today. These digital maps can then be displayed on the device. However,in order to work out the current location (and display this on the device) a phone or satellite signal needs to be available.
Just as is the case with the well known hard copy maps,these new digital maps work to help people navigate to and from the various places they need to get to. However Digital maps are actually much easier to use than their hard copy cousins. All you have to do is enter in the current location (sometimes this is not needed if using a GPS) and the destination,and then press a button,the system does all the work.
There’s no need to leaf through the index of the places on the map book to find the right page and location on the hard copy. The electronics do all this hard work. Thus thanks to the dawn of the Internet,finding your way around the World has become easier than ever before (do you remember having a whole set of yellow post it notes on your mapbook or A to Z?). Today,truck drivers,cab drivers,uber drivers,lyft drivers,delivery drivers,and more are all able to navigate their way around the nation with ease.
Digital mapping relies on satellite imagery. Sometimes this imagery is slightly out of sync with reality or needs to be updated as new roads are constructed and opened up. It’s vital to keep this in mind and be aware of this while using a digital map. Other issues to watch for are one-way streets that may not always be properly marked on a digital map and streets that stop and start with something in between such as a park or body of water. In the latter case,sometimes there is no bridge and you have to use a ferry,some GPS systems do not show this well enough,and if you are not careful you can drive into the water,not a good thing to doâ ¦
GPS or Global Positioning System works on this very principal. The mapping information is loaded into the device and the satellites then interrogated to find the users current location. The software on the tool then directs the person to their destination. GPS relies a lot upon digital mapping and the satellites it uses,as without that later it wouldn’t work.
Once the physical location of the destination are converted from an address to the coordinates on the map,(this by looking up the data on the database held on the device) the GPS uses this to aid the driver in locating and getting to their destination.
The software that communicates with the satellites then converts this information into a series of instructions that the GPS then relays to the driver,telling the driver where to turn and what route to take. The system tracks the drivers location throughout the trip and if the driver makes a wrong turn,the system will relay this matter to the driver and tell them to take thecorrect turns and use the right routes that will put them back on the right track to their destination.
Thanks to today’s technology,it’s not difficult to find addresses any more and more businesses than ever before are using GPS devices to their fleet vehicles. Drivers will also note that the GPS devices can detect everywhere that they go and many businesses are utilizing this information to locate lost or stolen vehicles and drivers who may require assistance in an emergency. Digital mapping is the wave of the future and more people and companies than ever before are using it today.
If you are interested in using Digital Maps for your business,then please see https://www.promap.co.uk.